Septodont Neogenate eugenate based paste for full-arch impression in edentulous patients. It is Easy and fast to mix, without formation of voids or bubbles.
Precise function impression for edentulous patients, prosthetic relining, baseplate stabilization during occlusal impression
Association of a white zinc oxide (56 %) based paste and a red-brown eugenol (14,86 %) based paste.
Directions for use
On a glass slab or paper mixing pad, place equal lengths of pastes from each of the tubes (between 9 and 11 cm according to the importance of the impression). Avoid contact between pastes if mixing is not carried out straight away.
Should be accomplished within about 30 seconds.
Using a fairly broad bladed rigid spatula, blend the two pastes carefully and vigourously until a uniform pink colour is obtained.
Taking impression :
Smear a little vaseline on the patients lips.
Transfer the mixture obtained to a special tray made from a base plate or a special resin.
Insert into the patient's mouth shaking the tray slightly to obtain a perfect flow.
Hold in place with a light pressure for about 1 minute, then make the patient carry out the required buccal movements.
The impression tray can be removed 2 1/2 to 3 minutes after insertion.
In the case of a flaw in the impression, hollow out the defective site of about 1 mm, and fill the space with a little freshly mixed paste.
Re-insert. After removal, clean the saliva from the buccal part of the impression with some moistened cotton swab. Clean the mixing spatula by heating over a flame and wiping, or use appropriate solvent.
Casting of the model :
As the material is dimensionally stable, pouring of the cast may be deferred.
WARNINGS AND PRECAUTIONS FOR USE
Zinc oxide based paste:
Very toxic to aquatic life with long lasting effects. Avoid release to the environment.
Eugenol based paste:
Warning (contains eugenol / colophany)
Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction.