SHOP FOR
SDI Conseal F Pit & Fissure Sealant

SDI Conseal F Pit & Fissure Sealant

₹507.0
₹600.0   (16% OFF)

100 item left in Stock

Description of product

Conseal f is fluoride-releasing and combines clinically proven SDI sealant technology with an intensive initial fluoride boost in conjunction with a long term fluoride treatment. The unique Conseal f filler component, with its blend of particles and high surface-to-area volume ratios, maximizes the sealant’s fluoride release.

COMPOSITION:

Multifunctional methacrylic ester

INDICATIONS:

1. Sealing of teeth with sound but vulnerable pit and fissure sites

2. Sealing of teeth with minimal pit and fissure caries

CONTRA-INDICATIONS:

1. Do not apply over carious areas

2. Do not apply to unetched areas

3. Product may cause skin irritations to some people. In such cases, discontinue use and seek medical attention.

Features

Releases fluoride 

Conseal f combines the proven SDI sealant technology with an intensive initial fluoride boost in conjunction with a long term fluoride treatment. The unique Conseal f filler component, with its blend of particles and high surface-to-area volume ratios, enables high fluoride release. Fluoride enhances caries prevention, remineralization, and the inhibition of enamel demineralization.

Lowest viscosity

Conseal f is the lowest viscosity sealant. The ideal low viscosity allows Conseal f to flow faster and deeper into the prepared pits and fissures. A recognized cause of pit and fissure sealant failure is an inability to seal. The tighter seal optimizes Conseal f’s mechanical retention and eliminates the space required for bacteria to grow. Conseal f’s tight seal is further enhanced by its unique UDMA resin system’s lower shrinkage and by being BIS-GMA free, avoiding the controversy of Bisphenol-A.

Low viscosity Super Etch LV

SDI has created a specialized blue gel 37% phosphoric acid etchant for sealants, in a direct delivery system. Super Etch LV’s lower viscosity improves the acid’s surface contact for deeper etchant penetration into the pits and fissures. The deeper acid penetration strengthens the mechanical bond and the retention success of Conseal f sealants.

Deepest penetration

Conseal f is available in direct placement syringes and single-dose completes. Both have pre-bent, superfine dispensing tips that facilitate controlled, direct extrusion for faster procedures and allow direct dispensing into previously difficult to reach areas. The Conseal f nozzle, one third the size of other brands, enhances complete sealing and retention by allowing penetration into the deepest pits and fissures; crevasses that will not admit the dispensing tips of other materials

Range of colors

Conseal f is available in opaque white. Conseal is available in clear and light grey

Hygienic placement

The Conseal f completes offering a direct and hygienic way of dispensing the sealant, eliminating the risk of cross-contamination

Biocompatible

Conseal f’s low water solubility minimizes the breakdown of the sealant in the oral environment.

Contains filler

Conseal f is 7% filled with a submicron filler size of 0.04 microns to withstand surface wear.

Clinically proven

Conseal pit and fissure sealants are clinically proven. 5,363 Conseal sealants placed in 774 children found no failures due to the material and established that ”sealants contribute significantly to dental public health

Key Specifications

STORAGE AND HANDLING:

  • Store at temperatures between 10° and 25°C (50°-77°F)
  • Use at room temperature between 20° and 25°C (68°- 77°F)
  • Exposure to temperatures outside the recommended range in this instruction sheet may shorten the shelf life
  • Exposure to ambient and operating lights may cause premature curing of the sealants.

PRECAUTIONS:

  • For professional use only
  • Keep out of reach of children
  • Shake sealant bottles before use
  • When not in use replace the cap tightly of syringes and bottles
  • Avoid prolonged contact of etchant and sealant with the skin or oral tissue, as it may cause inflammation of the oral tissues or skin sensitization
  • Do not take internally
  • Do not use after the expiry date
  • Do not expose the material to direct light
Packaging
  • 1 x 1g syringe
  • 2 x tips of 27 gauge 

User reviews

  0/5